1 | 3
Dyneema® Composite Fabric 0.66, 22g/sqm color: white
Article No.: 73098.WEI
€46.90/meter
incl. 19 % VAT plus
Please select your variant:
Roll width 1390mm
When folding the laminate into a carton it will get permanent folding marks that don't affect the technical properties. If you wish to receive the material without folding marks, please choose "shipping on the roll" during checkout.
In stock. Deliverable between 2-4 days
Meter
Product information
Dyneema® Composite Fabric 0.66, 22g/sqm
Dyneema® Composite Fabric is a high-tech laminate that has its origins in sailing. It is manufactured using a process typical of sailcloth laminates: tear-resistant fibers are embedded between two thin, transparent polyester films. What makes Dyneema® Composite Fabric unique is the fiber itself-Dyneema® is rightly considered one of the strongest fibers in the world, combining extremely low weight with exceptionally high load-bearing capacity. The finished material is characterized by high tear resistance, minimal elongation (even when wet), and resistance to creasing, UV radiation, and chemicals. The versatility of the material depends largely on the amount of Dyneema® fiber used and the chosen backing materials. Typically, a transparent film is used on both sides, which adheres well and ensures reliable waterproofing.
Dyneema® Composite Fabric 0.66 with a weight of 22 g/sqm, is an excellent all-around option at the lightest end of the weight spectrum. Thanks to a slightly thicker film on one side (0.18 mil instead of 0.08 mil), its abrasion resistance is higher than that of the lighter Dyneema® Composite Fabric 0.55. As a result, Dyneema® Composite Fabric 0.66 is also suitable for applications involving slightly higher mechanical stress, such as lightweight packing bags, tent floors, and tent reinforcements, etc.
According to Avient, partially bio-circular raw materials are used in the production of the Dyneema® fibers employed in Dyneema® Composites. In this process, residual materials from the wood and pulp industries are incorporated into the raw material supply via a certified mass balance approach. Combined with the use of 100% renewable energy, greenhouse gas emissions during fiber production can be reduced compared to conventional HMPE. Avient reports a reduction of approximately 3.76 kg of CO2 equivalents per kilogram of Dyneema® fiber. According to the manufacturer, the technical properties of the fibers are equivalent to those of conventional Dyneema®. The bio-circular raw materials used are certified under the ISCC mass balance system.
Short info
Range of Application
Tarp/Tent
Properties
Waterproof (over 5000mm), Ultralight, Inelastic
Stock Options
Standard Article
Country of Origin
USA
SUK
This article is equivalent to the grade CT1E.08/K.18
Processing
Dyneema® Composite Fabric is very lightweight and tear-resistant but also very thin. Hence it is prone to abrasion and should be handled with care. Due to the compact construction, it is very easy to work with Dyneema® Composite Fabric. It can be easily folded, doesn't stretch or fray and can be easily glued. For the versions with two film-layers like CT1E.08/K.18 we recommend gluing for the seams. The seam can also be sewn additionally. But to prevent the laminate to be perforated, the stitching distance should not be less than 3mm. We recommend applying an extra tape for reinforcements on sewn seams. We offer several adhesive tapes for gluing Dyneema® Composite Fabric.
Cutting
We recommend micro-serrated scissors when cutting fabrics with Dyneema®. Scissors with normal cutting blades cut this material poorly and quickly become blunt. Heat-cutting with a heat-cutter is also possible.
Construction
Dyneema® Composite Fabric consists of cross- and lengthwise Dyneema®-treads that are pressed and glued between two layers of a transparent polyester-film. The result is a permanently bonded, half-transparent, waterproof laminate with a slightly structured, but smooth surface. Regular folding whitens and softens the fabric which does not affect the technical properties.
Repairing
The strong Dyneema®-fibers prevent small damages to spread and they can easily be repaired with a self-adhesive patch of 71494.
Colours
Only the coloured Dyneema®-threads give the fabric the colour. Since the threads do not cover the whole surface, all colours remain in a light tone and the fabric stays semi-transparent.
Please note
Due to it's unique production process, Dyneema® Composite Fabric can contain stains, stripes, dots, variations in weaving or slight folding marks. This is more visible in the coloured versions. Since this doesn't affect the technical properties, this is not an error.
xport regulations
Dyneema® Composite sheet fabric is subject to the regulations of the United States Bureau of Industry and Security (BIS) and is classified Export Control Classification Number (ECCN) 1C990. The (re)export, or (re)transfer for military end-use in China, Hong Kong, Russia, Belarus, Cambodia and Venezuela is prohibited. Additionally, shipments to Crimea, Cuba, Iran, North Korea and Syria are prohibited. These restrictions apply to both the direct supply, and to the subsequent or downstream (re)transfer or any applications containing these items. For more infomation please get in touch with our customer service.
Trademark use
To use the Dyneema® trademark on your products, a trademark license agreement is required. This agreement can only be entered into directly with Avient. If needed, we would be happy to put you in direct contact with them.
Technical Informations
Material
Polyester (PES), UHMW-PE, Dyneema®, Bio-based Dyneema®
Fabric Construction
Laminate, Film
Weight (g/sqm)
22g/sqm
Roll Width
1390mm
Weight
0.66 oz/y² (22 gsm)
Maximum Tensile Strength (ASTM D3039)
63 lb/in
Tear Strength (Slit method Mil-C-21189 10.2.4)
14 lb
Puncture Resistance (ASTM F1342 Probe B)
1.9 lb
Water Resistance (AATCC TM127)
15,000 mmH2O
Water Column (mm)
15.000mm
Material
Polyester (PES), UHMW-PE, Dyneema®, Bio-based Dyneema®
Fabric Construction
Laminate, Film
Weight (g/sqm)
22g/sqm
Roll Width
1390mm
Weight
0.66 oz/y² (22 gsm)
Maximum Tensile Strength (ASTM D3039)
63 lb/in
Tear Strength (Slit method Mil-C-21189 10.2.4)
14 lb
Puncture Resistance (ASTM F1342 Probe B)
1.9 lb
Water Resistance (AATCC TM127)
15,000 mmH2O
Water Column (mm)
15.000mm
Further links to " Dyneema® Composite Fabric 0.66, 22g/sqm"
Matching articles
