TEAR-AID repairtape, Type B for PVC, transparent, by the meter

TEAR AID type B is a reliable, repair and adhesive tape for PVC/vinyl! It sticks reliably even at low temperatures. It is resistant to UV radiation, water, salt, sand. Due to its matt-transparent color, it is suitable for all colored materials and adapts very well to uneven surfaces. Also suitable for elastic materials - the tape is elastic and springs back after pulling. The tape comes on a paper backing and can be easily cut to size. Of course, also ideal for quick repairs on tour.

Processing instructions:

- Clean the the surface to be taped from dirt, oils and greases with alcohol

- Cut the TEAR AID to the appropriate size. For better, long-term hold, cut the corners round. For smaller cracks 2.5cm, for larger cracks or holes at least 5cm adhesive margin on undamaged surface is recommended.

- Carefully peel off protective paper Do not touch adhesive surface if possible. Place the adhesive piece smoothly on the repair area.

- Using fingers, plastic squeegee or similar, press the adhesive piece on evenly from the center.

- Allow to dry for a few minutes - finished

- The adhesive tape adheres 100% after 24 hours.

The values and applications mentioned are based on our own experience and tests. Due to the large number of possible applications and different materials, no guarantee of use can be given. Each use of the material must be checked in advance by own tests. No guarantee can be given for material that has already been processed and used.

TEAR AID type B is only suitable for PVC and vinyl. For the repair of (almost) all other materials, please use TEAR AID type A.