TEAR-AID repairtape, Type A, transparent, by the meter

TEAR AID Type A is a reliable, versatile repair and adhesive tape! It sticks to an incredibly wide range of surfaces (various fabrics, rubber, neoprene, stainless steel, aluminum, etc.) even at low temperatures. It is resistant to UV radiation, water, salt, sand. Due to the matt-transparent color it is suitable for all colored materials and adapts very well to uneven surfaces. Also suitable for elastic materials - the tape is elastic and springs back after pulling. The tape comes on a paper backing and can be easily cut to size. Of course, also ideal for quick repairs on tour.

Processing instructions:

- Clean the surface to be taped from dirt, oils and grease with alcohol.

- Cut the TEAR AID to the appropriate size. For better, long-term hold, cut the corners round. For smaller cracks 2.5cm, for larger cracks or holes at least 5cm adhesive margin on undamaged surface is recommended.

- Carefully peel off protective paper Do not touch adhesive surface if possible. Place the adhesive piece smoothly on the repair area.

- Using fingers, plastic squeegee or similar, press the adhesive piece on evenly from the center.

- Allow to dry for a few minutes - finished

- The adhesive tape adheres immediately with 90%, full adhesion is reached after 1 hour.

The values and applications mentioned are based on our own experience and tests. Due to the large number of possible applications and different materials, no guarantee of use can be given. Each use of the material must be checked in advance by own tests. No guarantee can be given for material that has already been processed and used.

TEAR AID Type A is not suitable for very smooth surfaces such as silicone and PTFE. Not suitable for PVC. For PVC please use TEAR AID Type B.